Concrete Pump Hire

Here you will know how you can position the boom and stabilize the truck. If the truck has been safely positioned then believe me you have accomplished the first step, as it is one of the major concerns during the concrete pumping process. You should make sure that the company you are hiring gives priority to safety. If Concrete pump hire is wrongly positioned, it may trigger serious or lethal accidents, converting a pumping task into a disaster. The pumping team can only use the machinery until they have checked that all safety conditions are fulfilled and that the pump truck and the boom are completely stable.

What is the best positioning of the boom?

It is not recommended for operators to solely depend on their analytical sense for deciding how far away the objects should be. As there is a chance of human error, they should use some specific techniques for this procedure. The remote control must be used to measure the distance between the boom and wires. The spotter should communicate through a walkie talkie or hand gesture to signal the boom operator to support him.

Adequate power supply and all the risks involved

Most components in the boom trucks are strong conductors of electricity. Additionally, the high water content in concrete makes it a good conductor of electricity once the concrete pump hire gets in touch with the power lines. There are several deaths reported of concrete pump operators caused by electrocution. Therefore concrete workers are instructed to wear rubber boots that protect against the high voltage carried by power lines in the surrounding. As safety comes first, therefore, the service provider must make sure that proper equipment is available on the site to prevent accidents. Such accidents have been seen during unfolding, folding or removal of pump from the site.

Keep a safe distance away from the excavated area

If the pumping needs to be done in an area near excavation then the operator needs to be careful to keep a safe distance of one foot away from the edge. If there is a slope then less or no danger is involved, however, if there is a vertical drop-off then keeping a minimum gap is important. Just keep in mind that this type of concrete pump hire usually doesn’t have a bigger downward reach. The pumps that reach 100 feet in height can only reach 50 feet downwards in the excavated area

Stabilization of concrete pump hire 

Most pump trucks use wood and aluminum pads as well as coating layers to distribute the load. You need to take into account the weight-bearing strength and capacity of the soil. This is a crucial step of the project so you must give importance to all the calculations and measurements for the safe installation of the truck. To keep the concrete pump stable, you need to find out how strong is the soil on which the truck is standing.

About Author

Aik Designs

See author's posts