How to Resolve Brother Printer Light Error
2 min read
Brother Printers
Brother Printers is a respected printer manufacturer who has supplied customers with top-quality printers that use wireless technology. Similar to other manufacturers however, they’ve also caused many mistakes. This includes firmware, hardware malware, as well as the time required to fill memory on the device. Any foreign object or dirt can cause printer problems. It is recommended that users thoroughly clean their Brother printers in order to correct any issues.
What is Brother Printer Light Error?
Are you a regular customer of the Brother Printer? The common light errors are a issue for Brother Printers. It is also known as the problem with the drum. This error is usually caused by the printer running too long, fuser cover left open, memory empty or opening of the front cover size issue, duplex not functioning with jam in, jam Brother the default password of the printer and so on.
Brother Printer Light Error
If you’d like to repair this Brother Printer error light yourself. If you notice the same error message on your printer, do not hesitate following these instructions.
Step 1: To Fix Brother Printer Light Error
- Click on the Cancel Job button in order to stop the printing
- After that, double-click on the Printer option on the Tasks Dock to get quick access to the printer queue.
- You can take an unfinished printer job out of your queue of printers
- Cover the front of the printer and switch off the power switch located on the left-hand side of the device.
- You must now activate the Power button, and continue pressing the Go button. Make sure that the toner, paper, and drum LEDs are illuminated.
- If you press the Go button, all lights will come all on.
- Click the Go button 8 times until you allow the green LED status light to blink for a short time until your printer has been reset.
- The status LED will change to green following the reset.
- Three times press the button to print print options.
- If the print settings pages aren’t printing, and the LED for the paper is on, you can try the steps below.
Step 2: Check Paper and Cassette
- Take the paper tray off Your Printer
- Place legal-sized pages on a tray for paper
- Make sure your papers are kept in a safe place and placed in a flat location. Additionally, ensure that you maintain the proper amount of pages within the paper’s maximum mark.
- Install the paper cassette on the front of your printer.
- Click on Go Tab
- If you can see the light, then you’re on the right path. However, if not, you’ll need take a few additional steps.
Step 3:
- Check Paper Jam
- Clean the jammed paper prior to trying to print
About Author
