Fixed SSD Is Read Only Mode Error In Windows 10/8/7
3 min read
SSD Read-Only Mode Issues
You might be one among those who have just come across SSD read-only mode issues when tried to install new applications or run software on your SSD. In such a situation, SSD might refuse to let you perform any operations that are required to write data to drive displaying the error message SSD is write-protected.
As a general, when SSD read only mode occurs, you will be unable to modify contents or save new files on this device. If you want to edit or write new data to a read-only SSD drive, you must remove read-only attribute on it and make SSD writable.
At first, let us see why SSD is showing write-protected or SSD works in read-only mode. The storage space of over-provisioned SSD drains and leads to the SSD read only mode problem. When SSD exceeds its lifetime writes, it creates trouble.
How To Fix SSD Is Read Only Mode Error In Windows 10/8/7
If you are also bothered by SSD read only issue, Don’t worry，do as what write in the follow 4 solutions below to solve it I listed.
Solutions 1: Modify Registry Key
An effective way to remove SSD read only issue is to edit the registry key. You can follow the step-by-step guide to solve the problem.
- Press Win + S to open Search. Then type Registry Editor in the box and select the app
2: In the pop-up window, copy the following path and past it to the address bar:
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
3.Double-click the WriteProtect key from the right pane to open its properties.
- Change the Value data from 1 to 0.
Solutions 2: Run CHDSK
If there are bad sectors on your SSD, you may also encounter problems related to “SSD is read only”. In this case, you can run CHDSK, a built-in utility in Windows, to check and repair disk errors.
1: Press Win + R to invoke Run window. Then input cmd and press Shift + Ctrl + Enter to run Command Prompt as administrator.
2: Type the command chkdsk #: /f (# is the drive letter of your problematic disk).
3: Restart the computer. Then you can check if your SSD runs without any problems.
Solutions 3: Format your SSD
When your SSD is read only, the file system may be corrupted. An effective way to solve the problem is to format your SSD. MiniTool Partition Wizard will be a grate helper.
Tip: All data stored in the partition will be deleted if you format it. So, you’d better back up your SSD before the operation.
Solutions 4: Remove SSD Read Only Issue
If your SSD is read only, you can use Diskpart to solve the problem. You should be careful when you perform the operation because any mistakes may bring damage to your disk.
Here is how to remove SSD read only issue.
Step 1: In Run window, type cmd and press Enter to open Command Prompt.
Step 2: In Command Prompt, type diskpart and press Enter.
Step 3: Input the following commands and remember to press Enter after each command:
List disk
Select disk * ( * refers to the drive number of your read only SSD)
attributes disk clear read only
Be it Samsung SSD, Crucial SSD, Corsair Force Series MP510 SSD, Kingston KC2000 or any other drives, SSD’s getting write protected and working in read-only mode is common. By performing the above-given methods you can easily solve SSD read only mode problems.
Error fixing methods that has CHKDSK and formatting certainly fix the error but involves data loss from the drive. Hence, it is recommended to backup your important data from the drive before you move on to fixing the SSD read only mode error. However, if you have lost data from SSD you can make use of MiniTool data recovery tool.
Conclusion
So, here my job is done. Now it’s your turn to try the solutions given one by one and get one works for you to fix the SSD read-only mode issues in Windows. All the solutions given are easy to use but still, it is advised to write the commands carefully.
About Author
